基于SolidWorks的電除塵器振打裝置設計畢業論文.doc

1本科畢業論文（設計）論文題目：基于SolidWorks的電除塵器振打裝置設計學生姓名：所在院系：機電學院所學專業：機電技術教育導師姓名：完成時間：摘要2本文分析國內外振打裝置技術的研究現狀和電除塵器振打裝置的工作原理，確定了采用既結合了我國的實際情況，又具有普遍性的側部撓臂錘振打的設計方案。針對目前側部撓臂錘振打存在的一些問題提出改進設計方法。本文利用Solidworks快速建立機械零件的三維實體繪圖和三維裝配這種功能強大的計算機輔助繪圖和設計軟件，對側部撓臂錘振打裝置的各個組成部分進行實體造型設計與裝配，較完善的對側部撓臂錘振打裝置的結構展示和設計。關鍵詞：電除塵器；振打裝置；特征；裝配3AbstractThispaperanalyzesthetechnologyathomeandabroadvibrationdeviceresearchandelectrostaticprecipitatorrappingdeviceworkingprinciple,identifiedusingacombinationofboththeactualsituationofourcountry,butalsohasuniversalflexiblesidearmvibrationhammerdesign.Sideviewofthecurrenttorsionarmvibrationhammersomeissuestoimprovethedesignmethod.Inthispaper,theuseofSolidworksmechanicalpartstoquicklycreatethethree-dimensionalgraphicsandthree-dimensionalentities,suchpowerfulassemblyofcomputer-aidedgraphicsanddesignsoftware,theoppositearmoftheDepartmentoftorsionvibrationhammerdevicetocarryoutthevariouscomponentsofthesolidmodelingdesignandassembly,betterDepartmentoftorsioncontralateralarmvibrationhammerdevicetodisplaythestructureanddesign.Keywords:Electrostaticprecipitator（ESP）；vibrationdevice；Characteristics；Assembly目錄41引言.62電除塵器振打裝置分析與設計.72.1振打裝置的原理和工作過程.72.2振打裝置設計方案分析.72.3Solidworks軟件的選擇.93振打裝置造型設計過程.93.1造型設計分析.93.2振打錘造型設計.93.2.1設計分析.93.2.2銷造型設計.93.2.3夾板造型設計.103.2.4錘頭造型設計.113.3振打錘臂造型設計.113.3.1設計分析.113.3.2錘臂造型設計.113.4振打軸造型設計.133.4.1設計分析.133.4.2軸一的造型設計.133.4.3軸二的造型設計.153.4.4軸三的造型設計.163.5振打軸承造型設計.163.6連接件造型設計.183.6.1聯軸套造型設計.183.6.1螺母和螺栓實體造型