鎧裝式金屬封閉開關設備安裝使用維護手冊

KYN28-12鎧裝式金屬封閉開關設備安裝使用與維護手冊Metal-clad enclosed SwitchgearInstruction manualXXXXXXXX有限公司XXXXXXXXXXXXXXXX, LTD., P. R. CHINA始終安全第一Your safety first-always！在開關設備安裝使用前請先仔細閱讀本說明書 Thats why our instruction manual begins with these recommendations開關設備只能安裝在適合于電氣設備工作的戶內場所。Only install switchgear and/or switchboards in enclosed rooms suitable for electrical equipment.確保由專職電氣人員進行安裝、操作和維護。Ensure that installation，operation and maintenance are carried out by specialist electricians only.必須保證現場電氣設備的聯接條件和工作規程的適用和安全性。Comply in full with the legally recognized standards（DIN VDE/IEC），the connection conditions of the local electrical utility and the applicable safety at work regulations.有關開關設備的一切操作，都要遵守說明書中的相應規定。 Observe the relevant information in the instruction manual for all actions involving switchgear and switchboards.危險Danger要特別注意說明書中標有這個危險標志的注意事項。Pay special attention to the hazard notes in the instruction manual marked with this warning symbol.不要超出開關設備在正常工作條件下的技術參數里規定的負載。Make sure that under operation condition of the switchboard the specified data are not exceeded.說明書應放在所有與安裝、操作和維護有關人員能方便地拿到的地方。Keep the instruction manual accessible to all persons concerned with installation, operation and maintenance.用戶的專職人員應對所有影響工作安全的事項負責，并正確管理開關設備。he users personnel are to act responsibly in all matters affecting safety at work and the correct handing of the switchgear.若對本說明書尚有疑問，我們將很樂意提供進一步的資訊。If you have any further questions on this instruction manual, the members of our field organization will be pleased to provide the required information.文檔由本人精心搜集和整理，喜歡大家用得上，非常感謝你的瀏覽與下載。凡本廠職工應熱愛電廠、熱愛崗位、熱愛本職工作，發揚“團結務實、爭創一流，立足崗位，愛廠敬業，盡職盡責，不斷提高工作質量和工作效率，圓滿完成各項生產和工作任務，為華能的建設和發展作出貢獻2019整理的各行業企管，經濟，房產，策劃，方案等工作范文，希望你用得上，不足之處請指正目錄頁碼1.總則61.1概述61.2標準和規范61.3工作條件61.3.1正常工作條件71.3.2特殊工 特殊工作條件71.3.3注意事項82技術數據82.1電氣參數82.2耐內部故障電弧性能92.3外形尺寸和重量103結構概述123.1基本結構123.2外殼和隔板133.3開關柜內的小室133.4防止誤操作的聯鎖/保護164運輸和保管204.1交付條件204.2包裝204.3運輸214.4交貨和中間保管225開關柜的現場安裝245.1安裝現場的一般要求245.2配電室平面布置基本方案245.3基礎255.3.1以配電室地板作為基礎255.3.2在混凝土地坪上的基礎框架265.4開關柜的安裝與拼接275.5母線的安裝聯接295.6電力電纜和控制電纜的聯接305.7接地銅排的聯接315.8安裝工作的收尾32目錄頁碼6 開關柜的運行376.1起動376.1.1準備工作376.1.2起動396.2開關柜的操作406.2.1斷路器手車406.2.2斷路器426.2.3接地開關436.2.4電纜室門446.2.5電氣/機械的指示/監控447維護457.1概述457.2檢查和保養467.3修理497.3.1一般性修理497.3.2更換元件497.4備件49 版權所有，禁止將本說明書的全部或部分，以任何形式提供給第三者。公司保留對提供的數據和圖解的更改權力，需更改時，不另行通知。Contents11.11.21.31.311.3.21.3.322.12.22.333.13.23.33.444.14.24.34.455.15.25.35.315.325.45.55.65.75.8Summary GeneralStandards and specificationsService conditions Normal Service conditions Special Service conditionsMatters need attentionTechnical dataSwitchgear electrical dataReceived internal arc natureDimension and weightsStructure summary Basic structure and variantsEnclosure and partitionsCompartments in the switchgear panelsInterlocks/protection against mishandlingDespatch and storageCondition on deliverPackagingTransportDelivery and intermediate storageAssemblage of the switchgear at siteGeneral site requirementsBasic scheme of switching rooms play layout.FoundationFoundation as the floorboard of switching room.Foundation frame on a concrete floorInstalment and joint of switchgearInstalment and joint of bus barContact of power cable and control cable.Join of the earth bus barThe epilogue of erecting workPage666677888910121213131620202021222424242525262729303132Contents66.16.1.16.1.26.26.2.16.2.26.2.36.2.46.2.577.17.27.37.3.17.3.27.4Switchgear runningStart-upPreparation workStart-upOperation of the switchgearVCB truckVCBEarth switchCable doorElectrical/mechanical indicate/monitorMaintenanceGeneral Checking and maintenance MaintenanceCheckingChange elementSpares*The data and illustrations are without engagement .Subject to change without notice.Page3737373940404243444445454649494949We reserve all rights to this publication. Misuse, particularly including duplication and making available of this manual extracts-to third parties is prohibited. The information supplied isnt liability，subject to approval.1 總則 Summary1.1 概述 GeneralKYN28-12鎧裝式金屬封閉開關設備（以下簡稱KYN28-12開關柜）適用于三相交流50Hz、7.212kV單母線及單母線分段電力系統，具有“五防”功能。開關柜的可移開部分可配置真空斷路器和真空接觸器等元器件。KYN28-12 metal-clad enclosed switchgear is suitable for 3-phase AC 50Hz/7.2-12kV single bus bar and single bus bar section electric power system.，with the function of “five preventions”. The removing compartment of the switchgear may be assembled with vacuum circuit breaker and vacuum contactor etc.1.2 標準和規范 Standards and specificationsKYN28-12開關柜滿足IEC298，GB3906，DL404等標準。The switchgear complies with the standards of IEC60298,GB3906,DL404 etc.開關柜外殼的防護等級為IP4X，當斷路器室門打開、手車移開時，防護等級為IP2X。 Enclosure protection degree of switchgear is IP4X, protection degree is IP2X when the door of VCB room is open and the truck is be drew out.在系統的安裝和運行期間，要遵守所有相關的IEC規范及國家或地方相關的安全導則，還應考慮江蘇長江電器股份有限公司提供的有關資料。During the installation and running of electric system, observe all the relevant information in the IEC and the safety regulations in GB or local electrical utility, and consider the relevant information provided by JIANGSU CHANGJIANG ELECTRIC CO.，LTD.，P.R.CHINA.1.3工作條件Service conditions1.3.1 正常工作條件 Normal service conditionsKYN28-12開關柜正常工作條件如下：Normal service conditions of switchgear following:室內環境溫度：Ambient temperature in room：最高溫度 +40CMaximum日平均值不大于 +35CMaximum 24 hour average最低溫度 -15CMinimum (according to “minus 15 indoor class”)室內環境濕度：Ambient humidity in room： 日平均相對濕度 95%及以下Daily average relative humidity less than 95%月平均相對濕度 90%及以下Monthly average relative humidity less than 90%安裝場所的海拔高度 1000m及以下Height above sea level at site less than 1000m地震烈度: 不超過8度Earthquake intensity: less than 8 degree沒有火災、爆炸危險，沒有嚴重污穢及化學腐蝕的場所。This product should not be used under conditions of fire, explosion，earthquake and chemical corrosion environments.1.3.2特殊工作條件Special service conditions對特殊工作條件，必須向制造廠咨詢。制造廠與用戶應就特殊工作條件取得一致意見。The manufacture must be consulted in advance about each special service condition. Special service conditions are to be agreed on by the manufacturer and user. l 已考慮安裝場所的海拔高于1000m時，空氣介質強度的降低對絕緣水平的影響。Allow for the reduction in the dielectric strength of the air when site altitude is over 1000ml 若環境溫度超出極限值，在母線和分支母線的設計上加以補償或限制載流量。在柜內安裝通風裝置將有利于開關柜的散熱。If the ambient temperature is over top of the high-point, must consider equalizing or limiting current capacity for the design of main bus bar and branching bus bar. Installation the aerator is favor of rejection of heat.1.3.3 注意事項：Matters need attention：若開關柜運行地區的濕度較高，溫度波動速度較快且幅度較大，開關柜在這種氣候環境下運行，就有凝露的危險，因此開關柜在備用和運行狀態下，用戶應保證加熱器全天侯投入！但在大電流運行中，可以不投入。If the humidity is higher on site, temperature fluctuations speed is rapidder and range is bigger, condensation phenomena will be appear for the switchgears running in this clime condition, so user should ensure that the heater running full time on spare and running condition! But running in high-current, the heater can stop. 2技術數據 Technical data2.1 開關柜電氣參數 Switchgear technical data額定電壓kV12額定絕緣水平1min工頻耐壓（有效值）kV42雷電沖擊耐壓（峰值）kV75額定頻率Hz50主母線額定電流A630,1250,1600，2000，2500，3150，4000分支母線額定電流A630，1250，1600，2000，2500，3150，4000*4秒熱穩定電流（有效值）kA16，20，25，31.5，40*額定動穩定電流（峰值）*kA40，50，63，80，100Rated voltage kV12Rated power-frequency withstand voltage(1min)kV42Rated lightening impulse withstand voltagekV75Rated frequencyHz50Rated main bus bar current A1600，1200，2500，3150，4000Rated branching bus bar currentA630，1250，1600，2000，2500，3150，4000*4s Short-time withstand current（rms.）kA16，20，25，31.5，40Peak withstand current（peak.）kA40，50，63，80，100，125*需裝備通風裝置 with forced ventilation.*40 kA為3秒 3 second for 40kA*儀用互感器的短路容量應單獨考慮 The short-circuit capability of transformer for measure should be considered by oneself.2.2 耐內部故障電弧性能 Performance bearing inside fault arcKYN28-12開關柜在設計上已考慮到開關柜內部故障電弧的問題，根據GB3906和IEC298進行了嚴格的試驗，能有效地保證設備及操作人員的安全。KYN28-12 has been considered with the problem of inside fault arc in switchgear on design. It is tested strictly according to GB3906 and IEC298, thus ensure effectively the safety of equipments and operation personnel.2.3外形尺寸和重量 Outline dimensions and weight 外形尺寸 Outline dimensions高度a （mm） 2200寬度b （mm）分支母線額定電流為1250A及以下，短路開斷電流為31.5kA及以下 800/650*分支母線額定電流為1600A及以下，短路開斷電流為40kA 800分支母線額定電流為1600A及以上 1000深度c （mm） 1350/1500Height a 2200（mm） Width b Rated branching bus bar current up to 1250A，Rated short-circuit breaking current(rms.) up to 31.5KA 800/650*（mm）Rated branching bus bar current up to 1600A，Rated short-circuit breaking current(rms.) up to 40KA 800 (mm)Rated branching bus bar current over 1600A， 1000(mm)Depth c 1350/1500 （mm） 重量8001200kg，詳細資料見表1。*配VD4斷路器可用。Weight 8001200kg，for table 1showing.*Suitable for VD4 being equipped.表1 安裝要求的尺寸及柜體重量柜內設備型式移開式移開式移開式柜深 c柜寬 b距墻距離mmmmmm150065080015008001000150010001200走廊寬度*mm100011001200安裝通道(室內通道要求)寬度長度（深）門框要求寬度高度mmmmmmmm10001500800220010001500100022001200150012002200重量（近似值）地坪承重kgkg/m28001000850100012001000List 1 Dimension and weight for switchgear installationMode of devicein switchgearRemovingtypeRemovingtypeRemovingtypedepth cWidth bDistance to wallmmmmmm1500650501500800501500100050The width of Passage *mm100011001200Assemble walkwayDemand of passage indoorWidthLength（Depth）Demands of door frameWidthHeight*mmmmmmmm10001500800200010001500100022001200150012002200Mass（approximation）Weight terrace bearedkgkg/m28001000850100012001000*取決于最大柜寬Depend on the most width of the switchgear.3 開關柜結構概述Structure general of switchgear3.1基本結構（圖3/1）Basic structure（Figure3/1）開關柜由固定的柜體和真空斷路器手車組成，這是它的基本結構。開關柜及安裝的電氣元件見圖3/1。進線柜或出線柜是基本柜方案，并有派生方案，如母線分段柜或計量柜等。此外，尚有配置固定式負荷開關、真空接觸器手車、隔離手車等方案。開關柜靠墻或面對面安裝。結構細節和柜內安裝設備，可見訂貨文件。The basic structure of switchgear panel comprises the panel itself a removing part. The panel and main components can see in figure 3/1.Incoming-line panel or outgoing-line panel are diagram of basic switchgear panel，there are other derivative diagram，for example ,contact panel or metering panel .in addition，There are so many diagram of the switchgear panel with stationary type load switch、（SF6）VCB truck、VC truck、Disconnect truck. The panel has two maintenance modes. That is single-face maintenance and double-face maintenance. The detail of structure and main components, can reference order document.3.2外殼和隔板 Enclosure and clapboard開關柜的外殼和隔板由優質鋼板制成，具有很強的抗氧化、耐腐蝕功能，且剛度和機械強度比普通低碳鋼板高。三個高壓室的頂部都裝有壓力釋放板。出現內部故障時，高壓室內氣壓升高，由于柜門已可靠密封，高壓氣體將沖開壓力釋放板釋放出來。相鄰的開關柜由各自的側板隔開，拼柜后仍有空氣緩沖層，可以防止開關柜被故障電弧貫穿熔化。低壓室D裝配成獨立隔室，與高壓區域分隔開。隔板將斷路器室B和電纜室C隔開，即使斷路器手車移開（此時活門會自動關閉），也能防止操作者觸及母線室A和電纜室C內的帶電部分。卸下緊固螺栓就可移開水平隔板，便于電纜密封終端的安裝。The enclosure and clapboard of the switchgears is made up from high quality steel, have very strong function to resistant oxidation and corrosion, and its rigidity and mechanical robustness is higher than common low-carbon steel board. Have been installed release of pressure plate on the top of three high-pressure chambers. When appear internal fault electric arc, air pressure heightens in high-pressure chamber, because that the doors of switchgear is already airtight coating, the pressure gas will clash out the release of pressure plat. Adjacent switchgears are isolated by its self side board, after putting the switchgears together, air buffer layer exist yet, it may prevent the switchgears from pronging and melted by electric arc. Low-voltage vault D is separate room with high-pressure area. Clapboard space isolate the VCB vault B with cable vault C, even if VCB. truck is moved(here the valve is closed self-motion),can prevent the operator from touching the electrification parts of bus bar vault A and cable vault C. releasing the tighten bolt, the level clapboard is removed, convenient for installation of cable seal terminal.3.3開關柜內的小室 Compartments in switchgear斷路器室（見附圖3/1，3/3，3/5，3/6）VCB vault (figure 3/1，3/3，3/5，3/6 showing)斷路器手車裝在有導軌的斷路器室B內，可在運行、試驗/隔離兩個不同位置之間移動。當手車從運行位置向試驗/隔離位置移動時，活門會自動蓋住靜觸頭，反向運行則打開。手車能在開關柜門關閉的情況下操作，通過門上的觀察窗可以看到手車的位置、手車上的ON（斷路器合閘）/OFF（斷路器分閘）按鈕、合分閘狀態指示器和儲能/釋放狀況指示器。VCB truck is installed in VCB vault B with track, may move in the middle of the position to service and test/disconnected. While the truck move from service position to test/disconnected position, the valve can cover un-move contact in self-motion, open when moving reverse. The truck can be operated when the truck vault door is closed, while you can watch the position of the truck, on (VCB tripping)/off(VCB closing) push knob in the truck, close and open indicator and charging/releasing indicator by inspection window. 斷路器手車 VCB truck手車可采用手動進行移動?？蚣苡珊辖痄摪迤囱b而成，上面裝斷路器和其他設備。具有彈簧觸頭系統的觸臂裝在斷路器的極柱上，當手車插入到運行位置時起電氣聯接作用。手車于開關柜之間的信號、保護和控制線，用一個控制線插頭聯接。手車剛插入開關柜就固定在試驗/隔離位置，同時也可靠地聯接到開關柜的接地系統。手車的所在位置，能通過觀察窗或裝在低壓室面板上的手車電氣位置指示器看到。除真空斷路器外，手車可配真空接觸器、隔離裝置和計量設備等。The truck can be moved by manual. The structure of the truck is made of the steel, the VCB and other equipments are installed on top of it. The arm of spring bush is installed on the pillar of the VCB，When the truck is pushed on the service position, it has the effect of electrical interlocking. The signal 、protection、control line between the truck and the switchgear is connection with the pin of control line. The truck is fixed on the test position as soon as it is pushed into the switchgear, and be connection to the earth system of the switchgear. The position of truck will be seen by the lamp that is installed on the looking window or the panel of low-voltage.Beside the VCB, the Truck can be equipped the vacuum contactor 、isolated device and the measuring equipment.母線室 Bus bar compartment母線從一個開關柜引至另一個開關柜，通過分支母線和套管固定。矩形的分支母線直接用螺栓聯接到主母線上，不需任何聯接夾。所有母線和分支母線都用熱縮套管覆蓋。套管板和套管將柜與柜之間的母線隔離起來，并有支撐作用。對電動應力大的開關柜，一般需要這種支持。The bus bar from one switchgear to the other switchgear is fixed with the bushing and the ramus bus .The ramus bus is connection to the main bus with the bolt, it neednt any clip. All bus and the ramus bus are covered with pyrocondensation bushing. The panel of bushing and bushing are isolated between the switchgear and the switchgear. And it has the effect on supporting.電纜室（圖3/1）Cable compartment（drawing 3/1）電流互感器和接地開關裝在電纜室后部。電纜室也可安裝避雷器。當電纜室門打開后，有足夠的空間供施工人員進入柜內安裝電纜（最多可并接6根）。蓋在電纜入口處的底板可采用非導磁的不銹鋼板，是開縫的，可拆卸的，便于現場施工。底板中穿越一、二次電纜的變徑密封圈開孔應與所裝電纜相適應，以防小動物進入。對于濕度較大的電纜溝，建議用防火泥、環氧樹脂將開關柜進行密封。CT and earth switch are installed on the back of the Cable Compartment. The Surge arrester is also installed on the Cable Compartment. When the truck and the horizontal panel are moved .There is enough room so that the worker install the cables (the most is 6).The bottom of panel that lie on the incoming of cable in made of the stainless steel panel，It is uncork, disassembly so that working on the local. The airplane of panel where is together secondary cable make sure as same as the installed cable prevent the small animal being into it.For the cable trench in humidity，It is suggested that the switchgear is airproofed with fireproofing mud and epoxide resin.低壓室（圖3/1、3/2） Low-voltage compartment (figure 3/1、3/2)開關柜的二次元件裝在低壓室內及門上?？刂凭€線槽空間寬裕，并有蓋板，左側線槽用來引入和引出柜間連線，右側線槽用來敷設開關柜內部連線。低壓室側板上有控制線穿越孔，以便控制電源的聯接。Low-voltage components of switchgear are installed in low-voltage compartment and on door. Control wiring trunking has ample space and cover board. Nearside wiring trunking is used to introduce and educe the wiring between switchgears, starboard wiring trunking is used to lay intramural wiring in switchgear. Traversing hole for control wiring on side board in low-voltage compartment is used to connect with control power supply.3.4防止誤操作的聯鎖/保護 Interlocks/protections for preventing mishandling具備一系列的聯鎖裝置，從根本上防止出現危險局面和可能引起嚴重后果的誤操作，因此有效地保護了操作人員和開關柜。聯鎖裝置地功能如下：A series of interlocks are provided to prevent mishandling, thus protecting both personnel and switchgear itself. The function of interlocks is following: 斷路器和接地開關在分閘位置時，手車能從試驗/隔離位置移動到運行位置