LeicaDNA03水準測量數據處理程序

1、編程作業Leica DNA03水準測量數據處理程序1 數據格式 -32 程序設計 -33 源代碼 - 44 編程總結 - 81數據格式Leica數據格式為GSI(Geo Serial Interface)，根據其數據位是8或16位分為GSI8和GSI16，其他格式完全相同。數據以行為單位，每行包含若干個16位或24位的字段，每個字段以開頭兩位數字表示數據意義，稱為WI(Word Index)，如41表示測量模式，11表示點號，32表示視距讀數，331表示后視第一次中絲讀數，332表示前視第一次中絲讀數，336表示前視第二次中絲讀數，335表示后視第二次中絲讀數。本次作業采用Leica DNA0

2、3數字水準儀原始數據。如下圖：第一行：觀測模式為BFFB； 第二行：測段起點為BM3，起始高程為480.1230m； 第三行：測站后視點號BM3，視距讀數28.58072m，第一次后視中絲讀數0.69018m，中絲讀數為2次讀數的平均值，標準偏差為0.04mm；第四行：測站前視點號Z1，視距讀數28.61654m，第一次前視中絲讀數1.69615m，中絲讀數為2次讀數的平均值，標準偏差為0.02mm；第五行：測站前視點號Z1，視距讀數28.62065m，第二次前視中絲讀數1.69610m，中絲讀數為2次讀數的平均值，標準偏差為0.11mm；第六行：測站后視點號BM3，視距讀數28.58569m

3、，第二次后視中絲讀數0.69017m，中絲讀數為2次讀數的平均值，標準偏差為0.04mm。2程序設計本次數據處理程序的窗口設計非常簡單，僅一個窗口，一個按鈕?！白x取數據”按鈕讀入原始水準儀數據，程序自動轉換，以表格形式輸出。表頭設計為“測站數”、“后視點號”、“前視點號”、“第一次后視中絲讀數”、“第二次后視中絲讀數”、“第一次前視中絲讀數”、“第二次前視中絲讀數”“測站兩次前后高差較差”、“高差之差累計值”、“累計視距差”、“累計視距”、“前視點高程”共12項，表頭之前輸出“起始點點號”和“起始點高程”。 3源代碼using System;using System.Collections.G

4、eneric;using System.ComponentModel;using System.Data;using System.Drawing;using System.Text;using System.Windows.Forms;using System.IO;namespace Leica_DNA03水準數據處理 public partial class Form1 : Form public Form1() InitializeComponent(); double, Rb = null; double, Rf = null; string sb = null; /后視點號 str

5、ing sf = null; /前視點號 double, Rbs = null;/后視視距 double, Rfs = null;/前視視距 string st2,bmn1,bmn2; double bm; double n; double, z1 = null; string s=null; public void Open_LeicaDNA03() /打開egm96文件的子函數 Rb = new double100,2; /后視中絲讀數 Rf = new double100,2; sb = new string100; sf = new string100; Rbs = new doubl

6、e100,2; Rfs = new double100,2; z1 = new double100,5; string s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11; double bm; s=new string100; openFileDialog1.Title = "選擇文件" openFileDialog1.InitialDirectory = "" openFileDialog1.Filter = "文本文件(*txt)|*txt|數據文件(*dat)|*dat|數據文件(*gsi)|*gsi" if

7、 (openFileDialog1.ShowDialog() = DialogResult.OK) System.IO.StreamReader sr = new System.IO.StreamReader(openFileDialog1.FileName); string st = sr.ReadLine(); string st2 = sr.ReadLine(); bmn1 = st2.Substring(12, 3); /起始點點號 bm = (double.Parse(st2.Substring(25, 6) / 10000; /起始點高程 s1=bm.ToString("

8、F4"); s0 = "起始點點號：" + bmn1 + " " + "起始點高程:" + s1+" m" int i=0; textBox1.AppendText(s0 + "n"); s1="測站"+" "+"后視點" +" "+ "前視點"+" "+"第一次后視"+" "+"第二次后視"+"

9、"+"第一次前視"+" "+"第二次前視"+" "+" "+"測站兩次前后"+" "+"高差之差"+" "+" 累計 "+" "+" 累計 "+" "+"前視點" s2=" 數 "+" "+" 點號 " +" " +"

10、點號 "+" "+"中絲讀數/m"+" "+"中絲讀數/m"+" "+"中絲讀數/m"+" "+"中絲讀數/m"+" "+" "+" 高差較差/m "+" "+"累計值/m"+" "+"視距差/m"+" "+" 視距/m "+" "

11、;+"高程/m" textBox1.AppendText("測站"+" "+"后視點" +" "+ "前視點"+" "+"第一次后視"+" "+"第二次后視"+" "+"第一次前視"+" "+"第二次前視"+" "+" "+"測站兩次前后"+" &q

12、uot;+"高差之差"+" "+" 累計 "+" "+" 累計 "+" "+"前視點"+"n"); textBox1.AppendText(" 數 "+" "+" 點號 " +" " +" 點號 "+" "+"中絲讀數/m"+" "+"中絲讀數/m"+&quo

13、t; "+"中絲讀數/m"+" "+"中絲讀數/m"+" "+" "+" 高差較差/m "+" "+"累計值/m"+" "+"視距差/m"+" "+" 視距/m "+" "+"高程/m"+"n"); st2 = sr.ReadLine(); do for (int j = 0; j <

14、; 5; j+) if (j = 0) sbi = st2.Substring(12, 3); /后視點號 Rbsi, 0 = (double.Parse(st2.Substring(25, 6) / 10000.0; /后視視距 Rbi, 0 = (double.Parse(st2.Substring(38, 9) / 10000.0; /后視中絲讀數 if (j = 1) st2 = sr.ReadLine(); sfi = st2.Substring(12, 3); bmn2 = st2.Substring(12, 3); Rfsi, 0 = (double.Parse(st2.Subs

15、tring(25, 6) / 10000; Rfi, 0 = (double.Parse(st2.Substring(38, 9) / 10000; if (j = 2) st2 = sr.ReadLine(); Rfsi, 1 = (double.Parse(st2.Substring(25, 6) / 10000; /前視二次視距 Rfi, 1 = (double.Parse(st2.Substring(38, 9) / 10000; /前視二次中絲讀數 if (j = 3) st2 = sr.ReadLine(); Rbsi, 1 = (double.Parse(st2.Substrin

16、g(25, 6) / 10000; Rbi, 1 = (double.Parse(st2.Substring(38, 9) / 10000; if (j = 4) /測站總結 st2 = sr.ReadLine(); z1i, 0 = (double.Parse(st2.Substring(25, 6) / 10000; /測站兩次高差之差 z1i, 1 = (double.Parse(st2.Substring(38, 9) / 10000;/高差之差累計值 z1i, 2 = (double.Parse(st2.Substring(54, 9) / 10000;/測站累計視距差 z1i, 3

17、 = (double.Parse(st2.Substring(70, 9) / 10000;/測站累計視距 z1i, 4 = (double.Parse(st2.Substring(86, 9) / 10000;/前視點高程 n = i + 1; s2 = Rbi, 0.ToString("F4"); s3 = Rbi, 1.ToString("F4"); s4 = Rfi, 0.ToString("F4"); s5 = Rfi, 1.ToString("F4"); s6 = z1i, 0.ToString(&qu

18、ot;F4"); s7 = z1i, 1.ToString("F4");/高差之差累計值 s8 = z1i, 2.ToString("F4"); s9 = z1i, 3.ToString("F4"); s10 = z1i, 4.ToString("F4"); s11 = n.ToString("F0"); si+3 = s11.PadLeft(3, ' ') + sbi.PadLeft(8, ' ') + sfi.PadLeft(8, ' ') + s2.PadLeft(12, ' ') + s3.PadLeft(12, ' ') + s4.PadLeft(12, ' ') + s5.PadLeft(10, ' ') + s6.PadLeft(16, ' ') + s7.PadLeft(12, ' ') + s8.PadLeft(12, ' ') + s9.PadLeft(14, ' ') + s10.PadLeft(11, ' '); textBox1