編譯原理 中間代碼優化

1、實驗三 中間的代碼優化某些編譯程序在中間代碼或目標代碼生產之后要對其進行優化，所謂優化就是對代碼進行等價的變換。而變換后的代碼運行結果與變換前的代碼運行結果相同。而運行速度加快或占用內存空間減少。中間的代碼優化就是對中間代碼進行等價的變換。 基本塊的有向圖 DAG（Directed Acyclic Graph)有向圖中任何一條通路都不是環路，則稱該有向圖為無環路有向圖，簡稱為DAG。一、 實驗題目：中間代碼的局部優化二、 實驗?zāi)康模赫莆站植績?yōu)化方法、提高機器的運行速度三、實驗內容：1 、構造基本塊內的優化DAG 假設：（1） ni 為已知結點號，n為新結點號；（2）訪問各結點信息時，按結點號逆

2、序排序2、完成對下例三類表達式的優化（1）常值表達式的優化（2）公共表達式的優化（3）無用賦值的優化3、輸出根據優化的DAG重組四元式四、設計概要：首先要實現表達式中間代碼生成，采用遞歸下降子程序法實現。ET0 “push(SYN,w)”T“QUAT” TF1”push(SYN,w)”F“QUAT”Fi“push(SEM,entry(w)”|(E)其中：·push(SYN,w)-當前單詞w入符號棧SYN；·push(SEM,entry(w)- 當前i在符號表中的入口值壓入語義棧SEM；·QUAT-生成四元式函數 T:=newtemp; QTj=(SYNk,SEMs

3、-1,SEMs,T);j+; pop(SYN,_);pop(SEM,_);pop(SEM,_); push(SEM,T);在對中間代碼進行局部優化五、程序代碼及運行結果：1.表達式中間代碼生成#include<iostream>#include<cstdlib>using namespace std;char str50;char sem50;char syn50;char ch;int i=0;int j=0;int n=0;int p=1;void push_sem(char w)semj+=w;void push_syn(char w)synn+=w;void G

4、en()char s22;char w;w=sem-j;if(w>='1'&&w<='9')s01=w;s00=sem-j;elses00=w;s01=' 'w=sem-j;if(w>='1'&&w<='9')s11=w;s10=sem-j;elses10=w;s11=' 'cout<<"("<<syn-n<<","<<s10<<s11<&

5、lt;","<<s00<<s01<<","<<'t'<<p+<<")"<<endl;push_sem('t');push_sem(p+47);int F()int m;int E();if(ch='(')ch=stri+;m=E();if(ch=')') ch=stri+;else/cout<<"表達式error!"<<endl;return 0

6、;else if(ch>='a'&&ch<='z')|(ch>='1'&&ch<='9') push_sem(ch);ch=stri+;else/cout<<"表達式error!"<<endl;return 0;return 1;int T()int k,m,l;k=F();if(k=0)return 0;while(1)/push_syn(ch); if(ch='*')push_syn(ch); ch=stri+;

7、 m=F(); if(m=0)return 0; Gen(); else if(ch='/') push_syn(ch); ch=stri+; l=F(); if(l=0)return 0; Gen();else break;return 1;int E()int k,m,l;k=T();if(k=0)return 0;while(1)/push_syn(ch); if(ch='+')push_syn(ch); ch=stri+; m=T(); if(m=0)return 0; Gen(); else if(ch='-') push_syn(ch

8、); ch=stri+; l=T(); if(l=0)return 0; Gen();else break;return 1;int main()int k,q=0;char w1,w2,w;char s12;cout<<"輸入表達式(以'#'結束):"cin>>str;w1=stri+;w2=stri+;if(w2!='=') i=i-2;q=1;ch=stri+;k=E();if(q=0)w=sem-j; if(w>='1'&&w<='9') s01=w;

9、 s00=sem-j;elses00=w;s01=' 'cout<<"("<<w2<<","<<s00<<s01<<","<<" "<<","<<w1<<")"<<endl;if(k=0) cout<<"error!"<<endl;elseif(ch='#') cout&

10、lt;<"OK!"<<endl;else cout<<"error!"<<endl;return 0;運行結果：2.代碼優化：（采用遞歸下降子程序法判斷表達式是否合法，方法如上）#include <iostream>#include <cstdlib>#include <string.h>using namespace std;int i=1; int j=0,n=0; int p; int m=1;int Ti=0;char prog100; char ch;char syn

11、20,sem503; void SEM(void) int i,j;for(i=0;i<50;i+)for(j=0;j<3;j+)semij='0'struct quat/四元式結構char result8;char ag18;char op;char ag28;quad25,newquad15;struct Ni/節點結構int pre2;char op;char bz258;N25;void newN(void)int l,j;i+;for(j=0;j<25;j+)for(l=0;l<8;l+)Ni-1.bzjl='0'for(j=0

12、;j<2;j+)Ni-1.prej=0;Ni-1.op='0'void dagt(void); void newquat(void);void fuzhi(void);/遞歸語法分析生成中間代碼void E(void);void T(void);void F(void);void pop0(char sz);void push0(char sz,char x);void pop1(char sz503);void push1(char sz503,char x3);void quat1(void); void quat0(char w);void print1(void)

13、;void print2(void);char *newT(void)char *p;char m8;p=(char *)malloc(8);Ti+;itoa(Ti,m,10);strcpy(p+1,m);p0='t'return(p);void main()p=0;syn0='#'SEM();sem00='#'cout<<"請輸入表達式："<<endl; docin.get(ch);if(ch != 'n') progp+=ch;while(ch!='#');p=0;c

14、h=progp+;while(ch!='#')fuzhi();print1();dagt();newquat();print2();void fuzhi(void)char temp3;temp0='0'temp1='0'temp2='0'if(ch<='z'&&ch>='a')|(ch<='Z'&&ch>='A')temp0=ch;push1(sem,temp);ch=progp+;if(ch='=&#

15、39;)push0(syn,ch);ch=progp+;E();if(m=0)cout<<"錯誤1!"<<endl;system("pause"); /return;if(ch='')ch=progp+;quat1();elsecout<<"錯誤2!"<<endl;system("pause"); return;elsecout<<"錯誤3!"<<endl;system("pause");

16、 return;elsecout<<"錯誤4!"<<endl;printf("%d",ch);system("pause"); return;/E、T、F是遞歸下降子程序的語法分析void E(void)char w;T();while(ch='+'|ch='-')push0(syn,ch);w=synstrlen(syn)-1;ch=progp+;T();quat0(w);void T(void)char w;F();while(ch='*'|ch='/

17、')push0(syn,ch);w=synstrlen(syn)-1;ch=progp+;F();quat0(w);void F(void)char temp3;temp0='0'temp1='0'temp2='0'if(ch='(')ch=progp+;E();if(ch=')')ch=progp+;else m=0;else if(ch<='z'&&ch>='a')|(ch<='Z'&&ch>=

18、9;A')|(ch<='9'&&ch>='0')temp0=ch;push1(sem,temp);ch=progp+; else m=0;void push0(char sz,char x)int top;top=strlen(sz);sztop=x;top+;sztop+1='0'void pop0(char sz)int top;top=strlen(sz)-1;sztop='0'void push1(char sz503,char x3)int top=1;while(sztop0)top

19、+;strcpy(sztop,x);top+;sztop+10='0'void pop1(char sz503)int top=1;while(sztop0)top+;top-;sztop0='0'sztop1='0'sztop2='0'void quat0(char w)int top=1,i;char *p;while(semtop0)top+;strcpy(quadj.ag1,semtop-2);strcpy(quadj.ag2,semtop-1);quadj.op=w;p=newT();for(i=0;i<8;i+)

20、quadj.resulti=pi;pop1(sem);top-;pop1(sem);top-;for(i=0;i<3;i+)semtopi=quadj.resulti;semtop2='0'j+;void quat1(void)char ag28;int top,i;top=1;while(semtop0)top+;ag20='_'for(i=1;i<8;i+)ag2i='0'strcpy(quadj.ag1,semtop-1);strcpy(quadj.ag2,ag2);quadj.op='='strcpy(quad

21、j.result,semtop-2);pop0(syn);pop1(sem);pop1(sem);j+;void print1(void)int i;cout<<"原來的四元組："<<endl;for(i=0;i<j;i+)cout<<(i+1)<<"、("<<quadi.op<<","<<quadi.ag1<<","<<quadi.ag2<<","<<qua

22、di.result<<")"<<endl;void dagt(void)int m,n,top,l,tag=0,tag1=0,tag2=0;char temp;for(m=0;m<j;m+)tag=0;for(n=i;n>0;n-)for(l=0;l<25;l+)if(strcmp(quadm.ag1,Nn-1.bzl)=0)tag=n;break;if(tag!=0)tag1=tag-1;if('0'<quadm.ag10&&quadm.ag10<'9')goto N3;

23、else goto N3;elseif('0'<quadm.ag10&&quadm.ag10<'9')if(quadm.ag20!='_')if('0'<quadm.ag20&&quadm.ag20<'9')quadm.ag10=quadm.ag10-'0'quadm.ag20=quadm.ag20-'0'switch(quadm.op)case '+':temp=quadm.ag10+quadm.ag20;br

24、eak;case '-':temp=quadm.ag10-quadm.ag20;break;case '*':temp=quadm.ag10*quadm.ag20;break;case '/':temp=quadm.ag10/quadm.ag20;break;default:break;tag=0;for(n=i;n>0;n-)for(l=0;l<25;l+)if(strcmp(quadm.result,Nn-1.bzl)=0)tag=n;break;if(tag!=0)continue;elsenewN();Ni-1.bz00=te

25、mp+'0' ;strcpy(Ni-1.bz1,quadm.result);continue;else newN();tag1=i-1;strcpy(Ni-1.bz0,quadm.ag1);goto N2;else goto N1;else N1:newN();strcpy(Ni-1.bz0,quadm.ag1);tag1=i-1;N3:if(quadm.ag20='_')tag=0;for(n=i;n>0;n-)for(l=0;l<25;l+)if(strcmp(quadm.result,Nn-1.bzl)=0)tag=n;top=l;break;

26、if(tag!=0)for(l=top+1;l<25;l+)strcpy(Ntag-1.bzl-1,Ntag-1.bzl);goto N5;elseN5:if(Ni-1.bz01)if(quadm.result1)top=0;while(Ntag1.bztop0)top+;strcpy(Ntag1.bztop,quadm.result);continue;elsetemp=Ni-1.bz01;strcpy(Ni-1.bz0,quadm.result);top=0;while(Ntag1.bztop0)top+;Ni-1.bztop0='t'Ni-1.bztop1=temp

27、;continue;elsetop=0;while(Ntag1.bztop0)top+;strcpy(Ntag1.bztop,quadm.result);continue;elseN2:tag=0;for(n=i;n>0;n-)for(l=0;l<25;l+)if(strcmp(quadm.ag2,Nn-1.bzl)=0)tag=n;break;if(tag!=0)tag2=tag-1;tag=0;for(n=i;n>0;n-)if(Nn-1.pre0=tag1)&&(Nn-1.pre1=tag2)tag=n;break;if(tag!=0)if(Ntag-1

28、.op=quadm.op)if(!Ntag-1.bz01)top=1;while(Ntag-1.bztop0)top+;strcpy(Ntag-1.bztop,quadm.result);else if(!quadm.result1)temp=Ntag-1.bz01;strcpy(Ntag-1.bz0,quadm.result);top=1;while(Ntag-1.bztop0)top+;Ntag.bztop0='t'Ntag.bztop1=temp; else top=1; while(Ntag-1.bztop0) top+; strcpy(Ntag-1.bztop,qua

29、dm.result); continue;elsenewN();Ni-1.op=quadm.op;strcpy(Ni-1.bz0,quadm.result);Ni-1.pre0=tag1;Ni-1.pre1=tag2;continue;elsenewN();Ni-1.op=quadm.op;strcpy(Ni-1.bz0,quadm.result);Ni-1.pre0=tag1;Ni-1.pre1=tag2;continue;elsenewN();strcpy(Ni-1.bz0,quadm.ag2);tag2=i-1;tag=0;for(n=i;n>0;n-)for(l=0;l<25;l+)if(strcmp(quadm.result,Nn-1.bzl)=0)tag=n;top=l;break;if(tag=0)newN();strcpy(Ni-1.bz0,quadm.result);Ni-1.op=quadm.op;Ni-1.pre0=tag1;Ni-1.pre1=tag2;continue;elsefor(l=top+1;l<25;l+)strcpy(Ntag-1.bzl-1,Ntag-1.bzl);newN();strcpy(Ni-1.bz0,quadm.result);N